All-in-one FILSTAR

FILSTER CU@(conveyor unit)
All-in-one package unit consists of a conveyor and FILSTARF
By connecting three lines of inlet, outlet and overflow of All-in-one FILSTAR to the existing tank,
highly efficient filtration can be realized easily.
Sludge is raked out automatically by the conveyor and maintenance-free solution management is achieved just after installation.
FILSTAR conveyor unit
FILSTAR conveyor unit
Suction of a used solution followed by filteration at 10m particle size, delivery of the cleaned solution and discharge of the sludge provides full-automatic operation only by switching on the unit.
Maintenance-free solution management can be realized just after the installation.
Features
The unit can be attached to the existing coolant tanks of the machining equipment.
The removed sludge is raked out automatically.
Highly compact design is achieved. (200mmx1150mmx1250mm)
Collection efficiency of more than 90% of particulates is available at 10m to 4mm in size.
Flow rate is changable in the range of 15L - 50 L/min
Specifications of conveyor unit

Model
KS15-CU
KSS20-CU
KSM25-CU
Flow Rate
15`20k/min
20`30k/min
30`50k/min
Particle Size on Separation
10m`2mm
10m`3mm
10m`4mm
Pipe size
15`
20`
25`
Dimensions
200mmx1,150mmx1,250mm
Power Supply
AC100V 50/60@ or@ AC200V 50/60
Fluids
Water soluble cutting oil , Flushing Water , Water(Low Viscosity Fluids)


FILSTER PU@(pump unit)
All-in-one package unit consists of a pump and FILSTARF
By connecting two lines of the inlet and the outlet of All-in-one FILSTAR to the existing tank,
highly efficient filtration can be realized easily.
Drain cup is attached to discahage the removed sludge. Easy-maintenance solution management can be realized just after the installation.
FILSTAR pump unit
FILSTAR pump unit
Suction of a used liquid followed by filteration at 10 particle size, delivery of the cleaned liquid provides full-automatic operation only by switching on the unit.
Easy-maintenance solution management can be realized from the first day of the installation.
Features
The unit can be attached to the existing coolant tanks of the machine tools.
The removed sludge is accumulated in the attached drain cup.
Highly compact design is achieved. (200mmx900mmx1000mm)
Collection efficiency of more than 90% of particulates is available at 10m to 4mm in size.
Flow rate is changable in the range of :15L - 50 L/min

Specifications of pump unit
Model
KS15-PU
KSS20-PU
KSM25-PU
Flow Rate
15`20k/min
20`30k/min
30`50k/min
Particle Size on Separation
10m`2mm
10m`3mm
10m`4mm
Pipe size
15`
20`
25`
Dimensions
200mmx900mmx1,000mms
Power Supply
AC100V@50/60@ or@ AC200V@50/60
Fluids
Water soluble cutting oil , Flushing Water , Water(Low Viscosity Fluids)



A proposal from industria (based on applied patents)
EThe whole used solution is suctioned and filtered by FILSTAR. To prevent the sludge precipitation in the tank and reduce solution make-up.
EThe existing tank is always filled with the clear solution cleaned by FILSTAR. To supply particulate-free (10m or larger in size) and clean solution to the process
ESolution can be circulated between the used-solution tank and the exsisting solution tank without any large scale construction of new tanks. To save cost and space
EThe pump unit provides a clear solution by filteration at 10m just after the installation!
No sludge removing! No tank cleaning! No filter-element replacing!
To be free form maintenance

1.Place industria's simple used-solution tank in the existing tank.
2.Set the simple used-solution tank beneath the outlet nozzle of the used solution in order to recover the whole volume.
3.Connect the outlet nozzle of FILSTAR to the existing tank and the inlet nozzle of FILSTAR to the simple used-solution tank.
4.Switching on CU/PU unit to start circulation the solution.

Proposal Flow Chart
Proposal Flow Chart


Applications
EPolishing machines EFilter substitute
EGrinding machines ECentrifuge substitute
EParts cleaners EPaper filter substitute
EWire cutting machines EMagnetic separator substitute
EOther machining equipment EMeasures to meet ISO standards
EMachine centers


Model
Dimensions
KD300
300mmx300mmx400mm
KD500
500mmx500mmx600mm

@@(To prevent drawing no liquid)






industria industria@brand
HOME | FIlSTAR | Air FIlSTAR | Valve | Ultrasonic Spindle | Order Production | Company | Inquiry | Site Map
Copyright © 2008 industria Co., Ltd. All rights reserved.